Sterndrives.Com
Marine Parts & Accessories

Sterndrives are our specialty.
We know the best options for your Mercruiser powered boat.

Sterndrives come in many types, styles, ratios and sizes.

We sell empty housings which are all factory painted and ready for
proper assembly to complete drive units ready to bolt into place.

We know what units and ratios are compatible with your engine & application
and we are here to advise you on what is the very best that Mercruiser has to offer.

Alpha One Generation II Sterndrives
(Please read the important note below)

Sterndrive Unit	Part Number	Ratio	Your Price (new)
Alpha Gen II Counter Rotation	5-5111200LP	1.47	$3800
Alpha Gen II Counter Rotation	5-5111300LP	1.62	$3800
Alpha Gen II Counter Rotation	5-5111400LP	1.81	$3800
Alpha Gen II Counter Rotation	5-511500LP	1.94	$3800
Alpha Gen II	5-5121200LP	1.47	$3500
Alpha Gen II	5-5121300LP	1.62	$3500
Alpha Gen II	5-5121400LP	1.81	$3500
Alpha Gen II	5-5121500LP	1.94	$3500
Alpha Gen II	5-5121600LP	2.00	$3500
Alpha Gen II	5-5121600LP	2.40	$3500

NOTE: Prices are subject to change. Mercruiser has just issued new prices and this site
might not be updated at this time.
Important Note: Alpha Gen II drives will NOT fit an older Alpha One Gimbal.
Also the reverse holds true. The Alpha One drive will not fit the newer
style Alpha Gen II gimbal.
Alpha Ones and Alpha Gen II's are not interchangeable in any way.
Most of the parts and dimensions are not the same.
Most parts will not interchange.

Alpha Gen II drives are a newer design and have some different features.
The Alpha Gen II upper and lower housings are fastened together with two
through bolts on either side of the drive (along with the front and rear bolts).
Alpha One drives, on the other hand, use one stud visible on either side.
Alpha Ones have two studs under the ventilation plate just above the prop.
Alpha Gen II drives do NOT have two studs with nuts above the prop.

Alpha Generation II drives started production is 1991. At that time,
boat manufacturers would use either depending on stock.

A note about RATIOS
Customers may notice that they do not see their ratio(s) listed.
Mercruiser updated the lower gear sets which changed the overall drive ratios.

What was a 1.50:1 is now a 1.47:1
What was a 1.65:1 is now a 1.62:1
What was a 1.84:1 is now a 1.81:1
What was a 1.98:1 is now a 1.94:1

Customers should not notice any real RPM difference should they
upgrade to the newer style ratios as long as they stay close to
the factory recommended ratio for their sterndrive package.

It should be noted that ratios are determined between drives by
the upper gears.
To be POSITIVE about what ratio you have you must count the teeth
on the upper gears. Don't always trust stampings.

A note about ROTATION
Do not confuse engine rotation with sterndrive or propeller rotation
ALL sterndrive Mercruiser Engines are left hand (standard, counterclockwise) rotation.
Most single engine boats use a right-hand rotation drive unit meaning that
the propeller rotation is right-hand (standard, clockwise) rotation.
Counter rotating drives are left-hand (counter, counterclockwise) propeller rotation.
Counter rotating drives have only been around in numbers for the last few years.
The advantage of having two drives rotating in opposite directions are
increased speed, improved slow and high speed handling, better course tracking,
more level ride, improved fuel economy and easier docking.

NOT ALL DRIVES CAN COUNTER ROTATE!
The drive must be specifically designed to be a counter rotation drive.
Attempting to run a standard rotation drive in a counter rotation direction
will positively destroy the drive in just a few minutes.

In most applications the RH (standard) drive is mounted on the starboard side.
The LH (counter rotation) drive is mounted on the port side.
The LH drive must have a LH propeller. The LH shift cable must be reversed at the binnacle to pull instead of push
for forward gear. Most controls allow for either direction by simply repositioning
the cable mounting location and attachment.

Always use extreme care when reinstalling the drives that they are properly
installed on the correct side or extreme expensive damage will occur.

Bravo Drives are bi-directional.
Rotation direction is simply determined by the shift cable direction
and no damage will take place by reversing the running direction
or by installing the Bravo drives on different sides. Again, the RH propeller is
usually installed on the starboard side and the LH propeller is usually
installed on the port side.

Use caution when attempting to operate the boat for the first time after
drive, shift cable, or propeller work has been done. Tie the vessel firmly
to a strong dock and test the shift for proper direction.
Improperly
installed props, drives or cables can make the boat go in reverse instead
of forward causing severe damage, injury or death. Just check it.

sterndrives.comalso has Alpha One,Bravo 2 and Bravo 3 Sterndrives too.

What?! You didn't find what you need?

Then it's time to call our parts experts.
Give our drive experts a call. We will find your part(s)!

Email us at Sterndrives.com




[Home][Email your Parts Request]